~ ~ ~
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 61

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 62

Deprecated: Function ereg_replace() is deprecated in /var/www/custom/archive.cmdm/article.php on line 102
厚度测量技术在医疗制造业中占有一席之地 - China Medical Device Manufacturer
CMDM

- English | 中文

Fri, January 19th, 2018

2006年1/2月刊 » 技术新知
厚度测量技术在医疗制造业中占有一席之地

光学厚度测量技术可对大多数的半透明多层膜、导道和涂层进行精密分析。

两家医学膜和导管业的原始设备制造商已采用了一种非接触性的厚度测量系统。这是第一次Lumetrics公司(美国纽约州,West Henrietta;www.lumetrics.net)的此种技术被应用在医学技术行业里。该公司不愿透露买家的名字,但指出买家是各自领域中的重要代表。

DI 330 OptiGauge系统使用光学技术精确地测量小于0.1m的绝对厚度。该公司表示,因为各层厚度是同时接受测量的,所以几乎对任何半透明的多层膜、导管或涂层均可进行细节分析。根据内置的参考标准对设备进行不断校准,即可确保其精确度。

公司的总裁John Hart指出,OptiGauge为顾客减少了材料测试时间,并降低了75%的成本。该系统对数据进行自动搜集、计算和归档,消除了人工操作所造成的数据输入错误。此外,它还可对内外直径、壁厚度和导管同心度进行同时测量,且不会造成任何损坏。

Hart表示,购买该系统的医疗膜和导管公司计划先将此设备用于执行质量保证测试,日后会将该系统转到在线测量应用上。

公司提供薄膜、导管和涂层产品的免费分析服务。公司将邀请潜在客户提交至少0.5mil的样本,然后就此样本进行分析并提交分析结果报告。


版权所有 © 2005-2010 医疗设计和制造OEM (CMDM) 本网站所有内容,如未获书面同意,不得以任何形式转载和节录。违反上述声明者,我方将依法追究法律责任。

本期其他技术新知

- 主页 | 当期杂志 | 订阅 | 联系方式 | 关于我们 -©2011 汇科传讯集团 医疗设计和制造OEM 版权所有.