~ ~ ~
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 61

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 62

Deprecated: Function ereg_replace() is deprecated in /var/www/custom/archive.cmdm/article.php on line 102
采用径向张开模具的球囊成形机 - China Medical Device Manufacturer
CMDM

- English | 中文

Fri, January 19th, 2018

2006年7/8月刊 » 技术新知
采用径向张开模具的球囊成形机

Interface Associates公司(加州,Laguna Niguel;www.interfaceusa.com)使用计算机控制机床生产用于血管成形、支架释放以及扩张和栓塞应用的各类球囊。该公司的2210H-CS(Clam Shell)球囊成形机采用双件式径向张开模具,可生产直径1.0-20.0mm、长度1.0到250.0mm的球囊。该成形机可使用挤压聚合物导管材料,将PE、PVC、聚亚安酯、聚酰胺(尼龙、Pebax)及PET等材料加工成球囊。

成形机金属模具由对称的两半组成,开模与合模的方向与球囊长轴垂直,大汽缸通过精密滚珠轴承导轨控制操作。与传统的三件式模具不同,该成形机的模腔为全开口式,可涂上特氟纶保护层,高压气体进入球囊导管延展受热部分,使球囊在金属模具内成形。该成形机采用高速、高压数字模块,控制进入球囊的气压和气流。此技术可在各球囊成形阶段提供不同的压力。

成形机所有功能由一台工业计算机控制,通过RS-232数据端口可取得实时流程参数数据的输出,所有参数的输入、控制和显示都可在触摸屏上进行。操作者可自行输入新参数,在检测或试运行过程中激活功能、校准机器、设置限值、配置新的球囊成形程序、从内存中调用全部程序,并可与其他外接计算机互传相关程序。

Copyright 2006 China Medical Device Manufacturer


版权所有 © 2005-2010 医疗设计和制造OEM (CMDM) 本网站所有内容,如未获书面同意,不得以任何形式转载和节录。违反上述声明者,我方将依法追究法律责任。

本期其他技术新知

- 主页 | 当期杂志 | 订阅 | 联系方式 | 关于我们 -©2011 汇科传讯集团 医疗设计和制造OEM 版权所有.