~ ~ ~
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 61

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 62

Deprecated: Function ereg_replace() is deprecated in /var/www/custom/archive.cmdm/article.php on line 102
连接器可提高监控系统的灵活性 - China Medical Device Manufacturer
CMDM

- English | 中文

Fri, January 19th, 2018

2008年1/2月CMDM电子快讯 » 技术新知
连接器可提高监控系统的灵活性

Tekdata公司生产的连接器适用于家庭监控系统。
医院努力降低成本,避免过度拥挤,并通过缩短住院时间提高患者舒适度,这促使远程病人监控系统开始普及。但对门诊病人而言,监控设备面临的最大挑战是大量的现有设备是专为住院病人设计的,或要求专业人员进行安装和维护。

Tekdata连接器公司(英国,Stoke-On-Trent,www.tekdata-interconnect.com)推出了一套全新的连接器,可以解决远程病人监控系统面临的部分难题。公司称该套连接器可赋予血流监控仪或便携式EEG系统等医疗监控应用前所未有的灵活性。可编程连接器的主体是一个2针模块,它可用于最高为48通道的系统中。

Tekdata公司现场销售经理Roy Blake说道:设想一名住在家中的流动患者,他时刻需要使用多通道血流监控系统。医院中使用的标准的非模块化系统可能带有极长的电缆,易将病人绊倒,因此不适合家庭使用。

连接器简化了配置过程,使专业水平较低的人员和患者可在病房内或在医院外迅速重新配置和调整监控系统。连接器允许接入多种传感器、电极和注射器,并含有适当的密封及二次注塑塑料制品,以方便重复灭菌和医院自洁。

复杂的监控系统也可受益于连接器的使用。脑部活动监测仪必须能传导极低振幅的信号,这是通过低损耗传声器电缆和特殊电极完成的。Blake说道:连接器用于脑部活动监测中经常采用的传声器电缆和镀金银制电极间的连接时,能确保精确度和信号保真性。

除连接器元件外,公司还生产电缆线束、电极元件和光纤产品,并提供原型设计、制造和组装服务。


版权所有 © 2005-2010 医疗设计和制造OEM (CMDM) 本网站所有内容,如未获书面同意,不得以任何形式转载和节录。违反上述声明者,我方将依法追究法律责任。

本期其他技术新知

相关文章

- 主页 | 当期杂志 | 订阅 | 联系方式 | 关于我们 -©2011 汇科传讯集团 医疗设计和制造OEM 版权所有.