~ ~ ~
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 61

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 62

Deprecated: Function ereg_replace() is deprecated in /var/www/custom/archive.cmdm/article.php on line 102
线轴到线轴系统可以研磨连续导丝 - China Medical Device Manufacturer
CMDM

- English | 中文

Wed, January 17th, 2018

2008年3/4月CMDM电子快讯 » 技术新知
线轴到线轴系统可以研磨连续导丝

Untitled Document
新型研磨技术可用于连续导丝研磨、从镍钛导线上去除氧化物以及处理编织导管等应用。
位于美国新泽西州奥克兰市的Royal Master Grinders研磨机公司(www.royalmaster.com)最近推出一种研磨系统,可以将一整卷轴的原材料(最多重达30lb)打磨成0.010英寸的直径,并在以2000rpm的速度旋转的同时将产生的导线卷入另一个线轴。这种线轴到线轴的研磨可以减少一般导丝研磨系统通常需要手动执行的几个步骤。

公司副总裁John Memmelaar Jr.先生说:通常,导线被切成各种长度,并按照各种批次进行分组,然后一次将一根导线送入研磨机,随后,导线被送到涂层站以及其它可能的地方进行进一步的后加工,他补充说,而线轴到线轴系统可以研磨连续导丝,并且避免所有这些步骤。如果需要,还可以将涂层流程整合到自动化线轴到线轴系统中。

除研磨连续导丝外,该系统还可用于将材料研磨成相同的直径。容限为<1 m。材料离开研磨机后,激光测量仪会读出直径,并在必要时反馈给设备对直径尺寸进行补偿。
该测量仪还会计算流程控制统计数据。

该系统设计性能强大,可以容纳直径14英寸的线轴(4英寸宽),其快速变换功能还可实现设备简易刀具切换。配备Heidenhain编码器的该研磨机可按长度追踪导线输出,并将结果显示在屏幕上。通过直观易用的触摸屏可以对研磨作业进行编程。

该系统的其它应用包括:从镍钛导线上去除氧化物、研磨编织导管、以及自动研磨标记带。研磨机可用作独立的装置;或者,可以由制造商将其无中心研磨工艺整合到客户系统中。


版权所有 © 2005-2010 医疗设计和制造OEM (CMDM) 本网站所有内容,如未获书面同意,不得以任何形式转载和节录。违反上述声明者,我方将依法追究法律责任。

本期其他技术新知

相关文章

- 主页 | 当期杂志 | 订阅 | 联系方式 | 关于我们 -©2011 汇科传讯集团 医疗设计和制造OEM 版权所有.