~ ~ ~
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 60

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 61

Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /var/www/custom/archive.cmdm/config.php on line 62

Deprecated: Function ereg_replace() is deprecated in /var/www/custom/archive.cmdm/article.php on line 102
模具传感膜 - China Medical Device Manufacturer
CMDM

- English | 中文

Wed, January 17th, 2018

2010年5月CMDM电子快讯 » 产品与服务
模具传感膜

制造救命用的医疗产品的过程中,确保模具的两部分完全对准且密封完好十分重要。Sensor Products(美国新泽西州,Madison;www.sensorprod.com)的柔性薄膜为制造商提供了一种可立即获取并永久性记录两个匹配或接触面之间的压力分布和强度的工具。

将Pressurex膜固定于模具的分型线上,即可显示压力是否分布均匀。“模具变得越来越复杂,且需要较高的压力,这种膜是一种极佳的染色工具,”美国Scientific Molding的所有者John Bozzelli说道。该公司在其咨询和培训服务中采用Pressurex证明分型线的匹配和通风口的开放和闭合。

Pressurex能显示2 - 43,200 psi(0.14 - 3000 kg/cm2)的压力,且可提供八种不同的压力范围。将薄膜放到两个接触面之间,薄膜就能够形成一个即时且永久的色彩变化,其强度与所施加的压力成正比。通过将颜色变化结果与比色图表进行对照(概念与石蕊试纸解析类似),可轻松地确定准确的压力强度。不需要培训且无需使用仪器。

版权所有 © 2005-2010 医疗设计和制造OEM (CMDM) 本网站所有内容,如未获书面同意,不得以任何形式转载和节录。违反上述声明者,我方将依法追究法律责任。

本期其他产品与服务

- 主页 | 当期杂志 | 订阅 | 联系方式 | 关于我们 -©2011 汇科传讯集团 医疗设计和制造OEM 版权所有.